Table 19:
Settings for calibration parameters
Setting
Short Description
Selected
value
Comments
IMagComp5
Magnitude factor to calibrate
current at 5% of In
0.00
IMagComp30
Magnitude factor to calibrate
current at 30% of In
0.00
IMagComp100
Magnitude factor to calibrate
current at 100% of In
0.00
VAmpComp5
Magnitude factor to calibrate
voltage at 5% of Vn
0.00
VMagComp30
Magnitude factor to calibrate
voltage at 30% of Vn
0.00
VMagComp100
Magnitude factor to calibrate
voltage at 100% of Vn
0.00
IAngComp5
Angle calibration for current at 5%
of In
0.00
IAngComp30
Angle pre-calibration for current
at 30% of In
0.00
IAngComp100
Angle pre-calibration for current
at 100% of In
0.00
12.5
Event counter CNTGGIO
12.5.1
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Event counter
CNTGGIO
S00946 V1 EN
-
12.5.2
Application
Event counter (CNTGGIO) has six counters which are used for storing the number of
times each counter has been activated. CNTGGIO can be used to count how many times
a specific function, for example the tripping logic, has issued a trip signal. All six counters
have a common blocking and resetting feature.
12.5.3
Setting guidelines
Operation:
Sets the operation of Event counter (CNTGGIO)
Enabled
or
Disabled
.
1MRK 511 286-UUS A
Section 12
Monitoring
293
Application manual
Summary of Contents for REC650 ANSI
