16
Quick Installation Guide
- PVS-175-TL “A.1 Version”
EN
• Attach the bracket
(03)
to the support with at
least 6 attachment screws (shown in
RED
) or at
least 6 frame fixing bracket for frame mounting
(shown in
BLUE
).
• Depending on the type of anchor chosen, drill
the required holes to mount the bracket
(03)
.
The pictures shown the recommended minimum
fixing point depending to the type of support.
Wall mounting minimum fixing points
Frame mounting (2 supports)
minimum fixing points
Frame mounting (3 supports)
minimum fixing points
• In case of use of “frame fixing brackets” (see
picture below as example) it will be possible to fix
the bracket to the frame structure without drill
any additional holes.
• Fix the bracket
(03)
to the support.
7.2 Assembly the Inverter to the
bracket
ATTENTION –
A
Handling and installation
operations shall be performed only by using
the special tools and accessories provided
with “PVS-175 Installation Kit” that have
to be ordered separately. The use of these
equipment are mandatory to safely install the
inverter. Refer to “Kit of recommended spare
parts” chapter content in the user manual for
further information.
• Lift the wiring box up to the bracket
(03)
using
the handles
(04)
or the M8 eyebolts.
ATTENTION –
A
Risk of injury due to the
heavy weight of the equipment. Always
consider the center of gravity of the
enclosures while lifting.
• Insert the heads of the two rear attachment pins
(17)
(placed on the rear part of the wiring box)
into the two slots on the bracket
(03)
. Check
that the pins
(17)
has been correctly inserted in
the slots as shown in the picture before releasing
the wiring box.
PVS
17