- 37 -
C010CC4
4 - Operations
S
tatistics menu
The Statistics menu is a view only display of internally logged inverter data.
Lifetime
Partial
Today
Last xxx
User period
Statistics
Last 365 days
Last 30 days
Last month
Last 7 days
Start xxxxxxxx
End xxxxxxxxx
Lifetime
- Displays the total statistics for lifetime operation:
•
Time: Total operating time
•
E-tot: Total energy produced
• Val. : Total production value, calculated with the currency and conversion coefficient set
in the relevant section of the SETTINGS menu
•
CO2: Amount of CO2 saved
Partial
- Displays partial statistics using a counter that can be reset*:
•
Time: Partial operating time since the counter was activated
•
E-par: Partial energy produced since the counter was activated
•
PPeak: Peak power value measured since the partial counter was activated
• Val. : Partial production value calculated with the currency and conversion coefficient set
in the relevant section of the SETTINGS menu
•
CO2 : Amount of CO2 saved daily since the counter was activated
* To reset all the counters of this submenu, press the ENTER button and hold for 3 seconds
until a beep is heard.
Today
- Displays the daily statistics:
•
E-day: Daily energy produced
•
PPeak: Daily peak power value
• Val. : Daily production value calculated with the currency and conversion coefficient set
in the relevant section of the SETTINGS
•
CO2: Amount of CO2 saved today
Last 7 days
-
Last month
-
Last 30 days
-
Last 365 days
-
Select any one of the above time periods to view the following information:
•
E-##: Energy produced over the period selected
•
Val. : Economic gain over the period selected
•
CO2: Amount of CO2 saved for the period selected
User period
- Displays the statistics for a period selected by the user. Use the display keys
to set the start and end date of the period as follows:
Scroll to User Period and press ENTER to open the Start/End date screen
• Use ENTER to move from one field to the next (from left to right).
• Use ESC to go back to the previous field (from right to left).
•
Press ESC repeatedly to go back to the previous menus.
To set the day:
Press DOWN to scroll numbers from 31 to 1, UP to scroll from 1 to 31.
To set the month:
Press DOWN to scroll months from December to January.; UP to reverse’
Summary of Contents for PVI-3.0-TL-OUTD-S-US
