ABB PSTX30, Installation And Commissioning Manual

Page: 51 / 146

6.2.4 Motor jog
Path in menu:
Menu
u
Motor jog
For navigation see Figure 54.
For Motor jog parameter settings,
see chapter 7.9 Slow speed.
Jog is an slow speed drive function to drive the motor
with low voltage output. This feature can be useful to
position for example a conveyor belt.
The jog has three predefined speeds:
• Fast Jog
• Jog
• Creep
The speeds can be adjusted with separate parameters.
For example: Fast jog backward and jog forward. This
function can be operated via the HMI, I/O or Fieldbus.
Press “Menu” to enter the Motor jog menu and
then select Motor Jog. Use and to jog forward and
backwards.
See 4 in Figure 53.
The motor will start
and accelerate to the rated speed according to the set
parameters as long as the Jog command is activated.
The motor stops immediately as soon as the command is
released.
It is possible to run the motor both in the forward and
reverse direction with at least two different slow speeds.
53
1SFC132081M0201
Local PSTX HMI
Motor Jog
Exit 14:30
Figure 53: Motor jog
Figure 54: Motor jog navigation .
MENU
Parameters
Assistants
Motor jog
Event log
Backups handling
System info
Settings J og
6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com