manualshive.com logo in svg

ABB PSTX105, Installation And Commissioning Manual

Share
Download
ABB PSTX105 Installation And Commissioning Manual Download Page 91

7.14  Event groups

Event groups consists of supervision functions divided in 
seperat lists in the HMI.

Supervision functions are functions to indicate when an 
event occurrs to the motor. 

There are three different types of supervision functions: 

•

Faults

•

Warnings

•

Protections

The supervision functions generate events based on 
different conditions in the motor and in the softstarter 
itself. Each individual event can be assigned to one or 
more Event groups. An Event group can be mapped to a 
relay output or/and a fieldbus signal. 

For each supervision function there is a parameter for 
assigning the corresponding event to one or more Event 
groups.

In PSTX there are seven Event groups, numbered from 0 
to 6. All event functions are set as default to one Event 
group.

There are seven event groups that can be used in 
whatever way appropriate to the user. Event groups 
4-6 will be completely unassigned by default and are 
convenient to use for custom applications. The other 
groups will have (or may have in the future) events 
assigned to them by default.

Example: 

TBD

7

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for PSTX105



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands