ABB PST Series, Installation And Commissioning Manual

Page: 89 / 178

89
1SFC132003M0201
6HWWLQJVDQGFRQILJXUDWLRQ
&KDSWHU
6HTXHQFHVWDUW
The sequence start function can be used for starting
several motors or multiple speed motors with different
parameter sets such as individual ramp times, initial
voltages, current limits etc.
Up to three individual parameter sets can be used
simultaneously.
7KH/2&$/&21752/PHQXFDQQRWEHHQWHUHGLI
6HTXHQFHVWDUWLVVHOHFWHG
1XPEHURIVHTXHQFHV1RRI6HT
To set parameters related to a sequence start, enter the
Seq Start group.
Select the required number of parameter sets for the
application.
The following selections are available:
No Sequence start is not activated.
The softstarter is in normal operation.
2 Two different parameter sets will be used.
3 Three different parameter sets will be used.
Press
6WRUH
to save/activate the selected function.
)LUVWVHTXHQFHVHWWLQJFXUUHQWVW6HW,H
Set the current for the first parameter group and press
6WRUH
to save the value.
This parameter will only be displayed if parameter
1RRI6HT
is set to 2 or 3.
6HFRQGVHTXHQFHVHWWLQJFXUUHQWQG6HW,H
Set the current for the second parameter group.
Press
6WRUH
to save the value.
This parameter will only be displayed if parameter
1RRI6HT
is set to 2 or 3.
Functional Settings
Start/Stop
Protections
Warnings
Inputs
Faults
Outputs
Fieldbus
)LJXUH 6HTXHQFHVWDUWJURXS
Settings
Seq Start