Only narrow lens has adjustable function.
Adjust the lamp heads and lens direction according corridor pathway as per needs
Open fixture
Ceiling
Adjust lamp and
head lens
PRECAUTION
Carefully read this instruction leafet before installing
or using the luminaire. This leafet provides important
information about the correct installation, use,
maintenance and disposal of this product. Please
observe the following guidelines:
1. Installation must be in accordance with European
installation requirements HD 60364 and
additional local regulations.
2. This product may not be modifed in any way what
so ever or used for a purpose or in an environment
other than for which it is designed. Failling to
observe these guidelines will invalidate the
warranty and the CE-compliance of this product.
3. The luminaire is suitable for indoor use only
4. Before installing the luminaire, the supply must be
isolated.
5. The luminaire must be replaced when it will not
achieve their rated duration.
MOUNTING INSTRUCTIONS
1. Use flat blade screwdriver insert the two slots and
pry off front cover from back plate.
2. Disconnect AC male and female connector.
3. Knock out center and appropriate mounting screw
holes on the back plate.
4. Route AC supply wire through center hole of back
plate.
5. Fix back plate on the mount surface with screw
and anchor nuts.
6. Connect the AC supply wire to terminal block,
reference wiring instruction showed next page.
7. Connect battery connector.
8. Connect AC male and female connector.
9. Snap front cover onto back plate.
10. Restore power and press test button, LED heads
will turn on.
11. Adjust the lamp head and lens direction as
perneeds.
MOUNTING
WALL MOUNTING
Back plate
Front cover
Battery connector
Terminal block
AC male and female connector
