Assembly Instructions / Power2 850-M
2 Safety / 2.3 Occupational safety
© Copyright 2019 ABB. All rights reserved.
HZTL455311P0010_EN
Revision A
March 2019
2.3
Occupational safety
Occupational safety
WARNING
Injuries to persons
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
cedures or non-compliance with safety and health standards.
u
When working on the Power2, always wear safety footwear and protect-
ive clothing to protect against mechanical hazards.
u
Keep personal protective equipment in perfect condition.
u
Obey mandatory signs.
u
Observe the general rules for occupational safety and prevention of accidents.
u
Only perform operations that are described in this chapter.
u
Only perform operations for which you have received instruction or training.
Wear safety footwear to protect against mechanical hazard and risk of falling.
Wear protective clothing.
WARNING
Risk of falling
When work is performed on the low-pressure or high-pressure stage, there
is a risk of falling.
u
Do not climb onto the low-pressure or high-pressure stage or onto at-
tached parts and do not use them as climbing aids.
u
Use suitable climbing aids and working platforms for work above body
height.
u
Only perform work on the low-pressure or high-pressure stage when you are in a physic-
ally and psychologically stable condition.
u
Only work with suitable tools, equipment and appliances that function properly.
u
Keep the workplace clean; clear away any loose objects and obstacles on the floor.
u
Keep the floor, equipment and the low-pressure and high-pressure stage clean.
u
Have oil binding agents ready and provide or keep oil pans at hand.
Welding work
u
Wear personal protective equipment (PPE) for welding operations.
u
When performing welding work in the vicinity of the low-pressure stage, always cover the
filter silencer to prevent the filter mat from being damaged.
u
Keep flammable objects and substances out of the vicinity of flying sparks.
u
Cover all connections on the low-pressure and high-pressure stage so that no foreign ob-
jects can enter the low-pressure or high-pressure stage.
Page
7
/
21
Summary of Contents for Power2 800-M
Page 2: ......