4.2.8 Adding Container
Overview
A container defines which patterns to use and what items to use for each position
in the patterns. This way, different containers can use the same patterns but with
different items.
This section describes how to add a container.
xx1900000591
Prerequisites
At least one item must be defined in the solution before configuring the container.
Adding a container
The
Container
window opens as illustrated below.
xx1800001437
Continues on next page
Application manual - PickMaster® Twin - PowerPac
105
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.8 Adding Container
Summary of Contents for PickMaster Twin - PowerPac
