50
PCS100 UPS-I
User Manual
—
7
USER INTERFACE
7.1
Graphic Display Module
The primary user interface for configuration of the PCS100 UPS-I is via the Graphic Display Module (GDM) which is
mounted in the door of the master inverter enclosure. It allows local control of the PCS100 UPS-I and shows the
system status and provides access to the operating parameters and event history.
The GDM interface consists of several pages; each page has a navigation & control panel and the status bar at the
top. The Navigation & Control Panel and the Status Bar are displayed at all times.
The navigation panel consists of buttons allowing page selection and the control panel consists of a Start (I) /
Stop (O) / Reset button allowing local control of the product.
The status bar displays the current product status and any warning or fault condition that may be present.
Table 7-1 describes general features of GDM, and Figure 7-1 displays Status page of GDM.
Feature
GDM
Display resolution
1024 x 600 pixels
Display size
10.1”
Color Graphic display
yes
Touch Sensitive display
yes
Full descriptions of status and faults yes
Local Start/Stop Reset Control
yes
Status Display
yes
Parameter adjustment
yes
Number of Event Log records stored 10000
Event log can be downloaded to a PC yes
Remote Web Pages
yes
Modbus TCP connection
yes
Table 7
-
1: PCS100 UPS
-
I GDM features
The GDM screen consists of following parts:
1.
Navigation & Control Panel
2.
Status Bar
3.
Page (selectable)
Summary of Contents for PCS100 UPS-I
Page 143: ...PCS100 UPS I User Manual 143 ...
