—
ABB Motors and Mechanical Inc.
5711 R. S. Boreham Jr. Street
Fort Smith, AR 72901
Ph: 1.479.646.4711
Mechanical Power Transmission Support
Ph: 1.864.297.4800
new.abb.com/mechanical-power-transmission
baldor.com
© ABB Motors and Mechanical Inc.
MN16024
All Rights Reserved. Printed in USA.
02/21
*16024-0221*
Remove all tools and replace the access hole plugs in the gearbox motor adapter flange.
TORQUE WRENCH
SOCKET EXTENSION
HEX BIT SOCKET
!!
USE SHORT INSERT
T-WRENCH
!!
DO NOT USE
Figure 8 - Tools to be used to tighten the clamp screw
Summary
The steps above are summarized in the image below.
STEP 1: INSTALL MOTOR STEPPED KEY
SLIDE KEY RETAINER ON HOLLOW SHAFT
STEP 2: MARK CLAMP COLLAR,
SLIDE ONTO HOLLOW SHAFT
STEP 3: ASSEMBLE MOTOR TO
GEARBOX AND TIGHTEN MOTOR
MOUNTING BOLTS
STEP 4: TIGHTEN SET SCREW
STEP 5: TIGHTEN
CLAMP SCREW
GEARBOX SIDE
MOTOR SIDE
Figure 9 - Summary of installation instructions. Please review details above.
