ABB NE820, User Manual

Page: 32 / 44

Section 3 Interface Modules
For advanced network settings and more diagnostic information, please use the CLI.
Detailed documentation is available in the chapter
The Command Line
Management Tool
in the NEOS management guide.
Factory default:
– IP address: 172.16.5.245
– Netmask: 255.255.252.0
– Gateway: Disabled
Consult your network administrator to know more on subnet.
Configuration
Configure the unit via Web browser. The unit can easily be configured through a
Web browser. Open the link http://172.16.5.245 in your web browser, and you will
be prompted with a Login screen, where the default settings for Username and Pass-
word are:
– Username: admin
– Password: CS4dmin
Once you have logged in, you can use the extensive integrated help function
describing all configuration options. Two common task when configuring a new
switch is to assign appropriate IP settings, and to change the password of the admin
account.
The password can be up to 64 characters long, and should consist of printable AS-
CII characters (ASCII 33-126);
Space
is not a valid password character.
For additional configuration information,
refer to System 800xA 6.0 Network
Configuration (3BSE034463-600*) manual.
32 3BSE080635