ABB NE802, User Manual

Page: 14 / 24

3BSE083678 14
Section 2 Interface Specifications
DIP switch settings
DIP-switches are accessible under the lid on top of the unit. DIP-switches are used
to configure the unit.
Prevent damage to internal electronics from electrostatic discharges (ESD) by
discharging your body to a grounding point (e.g. use of wrist strap), before the lid
on top/front of the unit is removed.
Prevent access to hazardous voltages by disconnecting the unit from AC/DC mains
supply and all other electrical connections.
Figure 2. Dip switch
When configuration via DIP-switches, the settings of DIP-switches configure the
unit only after a reboot (power off/on).