Navigator 500
Sodium analyzer
6 Operation overview – transmitter
OI/ASO550–EN Rev. G
33
6.6 View mode
Pages displayed in
View
mode comprise:
Diagnostics View
– displays a list of diagnostic messages identified by priority and message – see Fig. 6.6
Alarms View
– displays a list a list of alarms identified by priority (sequence number), source and status – see Fig. 6.7
Outputs View
– displays a list of alarms identified by analog output ID, output value and percentage of output value
– see Fig. 6.8
Signals View
– displays a list of active signals and their values – see Fig. 6.9
Chart View
– represents the wet-section readings as a series of color-coded traces – see Fig. 6.10
Fig. 6.6 Diagnostics View
01
O2
O3
O4
2012–04–15
10 : 31: 27
CAL
NAMUR icon and message priority –
see page 72
Diagnostic message
View
icon
Diagnostics View
Temp Failure S3
NV Error S3
Calibrating S3
Recovery S3
No.
Message
Fig. 6.7 Alarms View
A1
A2
A3
A4
A5
A6
A7
A8
2012–04–25
10 : 31: 27
CAL
Alarm acknowledge
status (Y / N)
Alarm source
Setpoint
Alarm ID
Alarm status
Alarms View
ID
Setpoint
Source
Status
Ack
100.0 ppb
100.0 ppb
100.0 ppb
100.0 ppb
– – – –
– – – –
– – – –
– – – –
Fig. 6.8 Outputs View
2012–04–15
10 : 31: 27
CAL
AO1
AO2
AO3
AO4
Output value
Analog
output ID
% of output value
Output
Percent
Outputs View
ID
4.00 mA
4.00 mA
4.00 mA
4.00 mA
0.0 %
0.0 %
0.0 %
0.0 %
