5
I N S TA L L AT I O N , O P ER AT I O N S A N D M A I N T EN A N C E M A N UA L
These instructions are intended for use by fully
qualified personnel and are not a substitute for
adequate training, experience and supervision.
This manual is not intended to be a substitute for
adequate training and experience in the safety
procedures related to this device. If you require
clarification or additional information, contact your
ABB representative. Please reference the Project
Number shown on the main nameplate (See Lineup
Nameplate section of this manual).
Warning
Detailed descriptions of standard repair
procedures, safety principles and service
operations are not included. It is important to note
this document contains some warnings and
cautions against some specific service methods
that could cause personal injury to service
personnel, damage equipment, or render it unsafe.
These warnings do not cover all conceivable ways in
which service, whether or not recommended by
ABB, might be performed, or the possible
hazardous consequences of each conceivable way,
nor could ABB investigate all such ways. Anyone
using service procedures or tools, whether or not
recommended by ABB, must satisfy himself or
herself thoroughly that neither personal safety, nor
equipment safety, will be jeopardized by the
service method or tools selected. Should further
information be required or specific problems arise
that are not sufficiently covered, refer the matter
to an ABB service representative.
The purchaser, installer or ultimate user is
responsible for ensuring that warning signs are
attached and all access doors and operating
handles are securely locked when the gear is left
unattended, even momentarily.
All information contained in this manual is based
on the latest product information available at the
time of printing. The right is reserved to make
changes at any time without notice.
Safety notations alert personnel to possible death,
injury or property damage situations. The following
four safety notations and words are used in the
manual to indicate the degree of hazard that may
be encountered by the user.
Danger
– Indicates an imminently
hazardous situation which is not
avoided and has a high probably of
death or serious injury and substantial
property damage.
Warning
– Indicates a potential
hazardous situation which is not
avoided and has some probably of
death or serious injury and substantial
property damage.
Caution
– Indicates a potential
hazardous situation which is not
avoided and has a minor or moderate
probably of death or serious injury and
substantial property damage.
Notice
– Indicates a statement of
company policy as it relates directly to
the safety of personnel or protection of
property.
