10
M ICROG UA R D™ SOLUTION |
M I C R O G UA R D | U M/M I C R O G UA R D - EN R E V. B
. . .3 System Hardware
5
Turn on the analyzer .
6
Put on the backpack .
Figure 14 Insert Inlet Tubing in Port
Figure 15 Secure Wand in Handle
Figure 16 Secure handle
NOTE
If the backpack does not fit, adjust the backpack shoulder
straps so that the backpack fits properly .
7
Take the end of the wand (the other end has been attached
to the inlet of the analyzer) and secure it into the handle with
the screw . Unscrew the clip at the bottom of the handle to
loosen the clip .
The clip does not have to be unscrewed all the way .
8
Once loose, insert the wand and screw the clip until the
handle sits firmly .
You are now ready to begin using the MicroGuard™ mobile
application on the NX6 .
Analyzer Power-On
Turn on the analyzer . Refer to GLA131 Series Microportable user
manual, document #3KXG167001R4601 .
