ABB-Welcome
|
— 6 —
No.
Functions
1
4.3" Color display
2
Communication button
2A For incoming call, press this button within 30 seconds to activate
communication. Press it again to end the call.
2B In standby mode, press this button to enter the communication menu.
2C In standby mode, hold this button to activate the broadcast function (if
the multi-indoor station is installed in the same apartment).
If the LED flashes slowly, this indicates an incoming call.
If the LED illuminates, this indicates that a conversation is in progress.
If the LED flashes rapidly, it indicates system is busy.
3
Unlock button
3A Press this button to open the door at any time.
3B Auto-unlock: The door is automatically opened after an incoming call
(Hold this button for more than 10 seconds until the backlit LED turns
On. Tthe same operation will switch off the function and LED will be
turned off.)
If the LED illuminates, this means auto-unlock.
If the LED flashes rapidly, it means that the door has been opened over the
set time. (The sensor must be connected first).
4
Surveillance button
4A In standby mode, press this button to survey the default outdoor station.
4B While the display is on, press this button to the survey the next outdoor
station. (This function is available depending on the installation type .)
4C While the display is on, hold this button to take a snapshot.
4D In standby mode, if the LED flashes, press this button to display the
"history" record.
If the LED flashes slowly, this represents a notification of a missed
call.
5
Mute button
5A In standby mode, press this button to mute ringtone of the indoor
station.
5B In standby mode, hold the button to mute ringtone of all indoor stations
in the apartment.
5C Press this button to reject incoming call.
5D During the conversation, press this button to mute microphone.
The LED illuminates to indicate mute status.
