Mounting/Installation
Product manual 2TMD041600D0107
│
16
7.3.9
Cavity wall installation
Fig. 13:
Cavity wall installation
[1] Attach a pair of supporting brackets to the back cover of the indoor station. Place 4 screws
through the back cover and attach with 4 claw brackets.
[2] Rotate 4 claw brackets to attach to the supporting brackets and pull the rubber bands
around the corner of the claw brackets to fix the claws.
[3] Put the back cover into the cavity wall
[4] Tighten the screws
[5] Latch the upper part of the indoor station onto the bottom part. Place the upper side of the
indoor station on the lock-in lugs and then press the bottom side onto the bottom part of the
device until it is caught by the clamp.
7.3.10
Replace the front cover
Fig. 14:
Replace the front cover
The installation of the indoor station is now complete.
