Mounting/Installation
Product manual 2TMD041600D0107
│
12
7.3.3
Installation dimension
Fig. 5:
Installation dimension
■
The bottom of the device has screw holes for fastening on the wall according to the above
dimension instructions.
■
In addition, the bottom of the device can be fixed to the existing flush-mounted box. The
dimension of the compatible flush-mounted box is shown in illustration above.
7.3.4
Wiring
Fig. 6:
Wiring
Affix the bottom of the device and connect it in accordance with the illustration. The insulated
section of the cable end must not be longer than 10 mm.
7.3.5
Address setting
Set addresses of the preferred outdoor stations and the address of the indoor station on the
jumper. (See Chapter "Adjusting the device".)
