Important information
4
Electrical Linear Actuators for Continuous Modulating Control LME620AI / LME620AN (Contrac)
43/68-13 EN
1
Important information
1.1
General
Read and save all instructions prior to installing, operating, and servicing this product. If any of the in-
structions are not understood, contact your ABB representative for clarification.
1.2
Symbols
In order that you can make the best use of this document and to ensure safety during commissioning,
operation and maintenance of the equipment, please note the following explanation of the symbols
used.
Explanation of the symbols used:
As well as the instructions in this document, you must also follow the generally applicable accident pre-
vention and safety regulations.
If the information in this document is insufficient in any situation, please contact our service department,
who will be happy to help you.
Please read this document carefully before installation and commissioning
1.3
Transport and storage
Carefully inspect for shipping damage. Damage to the shipping carton is usually a good indication that
it has received rough handling. Report all damage immediately to the freight carrier and your ABB rep-
resentative. Verify that the items on the packing list or bill of lading agree with your own.
Symbol
Signal Word
Definitions
STOP
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
(High level of risk.)
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
(Medium level of risk.)
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury.
(Low level of risk.)
NOTICE
NOTICE indicates a potentially harmful situation which, if not avoid-
ed,
may result in damage of the product itself or of adjacent objects.
(Damage to property)
IMPORTANT
IMPORTANT indicates useful hints or other special information
which, if not observed, could lead to a decline in operating conve-
nience or affect the functionality.
(Does not indicate a dangerous or harmful situation.)
To ensure proper performance, use qualified personnel who have been trained,
qualified and certified by ABB to install, operate, update, tune, and maintain the ac-
tuator, the electronic units and the wiring.
ABB will not take any responsibilty for personal injuries or material damages which
were caused by non-trained, non-qualified or non-certified personnel.
