Smart Buildings
Safety
Note about navigation in the PDF: Key combination 'Alt +
IS/S 8.1.1, ISP/S 8.1.1 | 9AKK107992A0761 EN Rev. B 9
left arrow' jumps to the previous view/page
2.12
FCC note
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Building Automation Switch
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
2.13
Recycling note
After usage, this device must be disposed of properly as electronic waste, in accordance with the current
disposal regulations of your county, state, and country.
2.14
About this Manual
The user manual contains a device description, safety instructions, a description of the display, and the
other information that you need to install the device.
Documentation mentioned in the that is not supplied with your device as a printout can be found as PDF
files for downloading on the Internet at:
