Smart Buildings
Product Overview
Note about navigation in the PDF: Key combination 'Alt +
IS/S 8.1.1, ISP/S 8.1.1 | 9AKK107992A0761 EN Rev. B 33
left arrow' jumps to the previous view/page
4
Installation
On delivery, the device is ready for operation.
Perform the following steps to install the device:
•
4.1 Checking the package contents on page 33
•
4.2 Installing and grounding the device on page 33
•
4.3 Connecting the terminal blocks on page 34
•
4.4 Connecting data cables on page 35
•
4.5 Attach touch protection on page 35
•
4.6 Operating the device on page 35
4.1
Checking the package contents
•
Check whether the package includes all items named in the section
8.1 Scope of delivery on page 43
•
Check the individual parts for transport damage.
4.2
Installing and grounding the device
You have the following options for mounting your device:
•
4.2.1 Installing the device onto the DIN rail on page 33
4.2.1
Installing the device onto the DIN rail
Prerequisite:
The device is for mounting on a 1.38 in (35 mm) DIN rail in accordance with DIN EN 60715.
Fig. 10: Mounting on the DIN rail
Proceed as follows:
•
Slide the upper snap-in guide of the device into the DIN rail.
•
Push the device downwards and onto the DIN rail.
•
Snap-in the device.
2C
D
C
072
01
3F
001
5
