1.7.2 Performance according to ISO 9283
General
At rated maximum load, maximum offset and 1.6 m/s velocity on the inclined ISO
test plane, with all six axes in motion. Values in the table below are the average
result of measurements on a small number of robots. The result may differ
depending on where in the working range the robot is positioning, velocity, arm
configuration, from which direction the position is approached, the load direction
of the arm system. Backlashes in gearboxes also affect the result.
The figures for AP, RP, AT and RT are measured according to figure below.
xx0800000424
Description
Pos
Description
Pos
Programmed path
E
Programmed position
A
Actual path at program execution
D
Mean position at program
execution
B
Max deviation from E to average path
AT
Mean distance from pro-
grammed position
AP
Tolerance of the path at repeated
program execution
RT
Tolerance of position B at re-
peated positioning
RP
IRB 760-450/3.2
IRB 760-445/3.2
Description
0.20
Pose accuracy, AP
a
(mm)
0.05
Pose repeatability, RP (mm)
0.80
Linear path repeatability, RT (mm)
3.30
Linear path accuracy, AT (mm)
0.13
Pose stabilization time, PSt (s) to within 0.5 mm of
the position
a. AP according to the ISO test above, is the difference between the teached
position (position manually modified in the cell) and the average position obtained
during program execution.
The above values are the range of average test results from a number of robots.
40
Product specification - IRB 760
3HAC039612-001 Revision: R
© Copyright 2021 ABB. All rights reserved.
1 Description
1.7.2 Performance according to ISO 9283
Summary of Contents for IRB 760
