Planning and application
© 2006 ABB STOTZ-KONTAKT GmbH
34
ABB i-bus
®
EIB / KNX
4 Planning
and
application
In this section you will find some tips for practical use of the Data Logging
Unit.
4.1 Application
fields
4.1.1 Application
1
This Unit can be used for example, in an office complex in order to record
the operating life of fluorescent tubes.
For example, a reference office in the office complex is taken and from this
data the switch on duration and switching operations are recorded.
Based on these values it is possible to determine what the service life of the
fluorescent tubes will be. This will allow you to make assumption with regard
to the maintenance expenditure and effort in the office complex.
4.1.2 Application
2
The Unit can be used for example in a functional building to record the
switch on times of pumps in the heating system.
The service life of the pumps can be derived from the switch on time.
This enables co-ordination of prompt pump maintenance.
4.1.3 Application
3
This Unit can be used for example in a department store to record the
operating duration of the motors in the escalators.
A maintenance plane can be created based on the recorded use. The plan
can be co-ordinated so that the operations in the department store are not
affected.
4.1.4 Application
4
The Unit can be used for example in a hotel to record the operating life
of filters in the air conditioning.
A maintenance plan can be created using this data.
