![background image](http://html1.mh-extra.com/html/abb/ht608827/ht608827_operation-manual_3334958070.webp)
Operation Manual / A130-H.. - A140-H..
7 Periodic maintenance work / 7.2 Cleaning components mechanically
© Copyright 2021 ABB. All rights reserved.
HZTL4030_EN
Rev.G
July 2021
7.2.7
Cleaning the cartridge group on turbine end
Soaking the contamination
Baked layers of contamination from coked oil occur at the turbine end. The contamination
can be removed by soaking and brushing. The procedure for soaking the layers of contamin-
ation as well as for cleaning the turbine are described in the following.
Fig. 31: Soaking the turbine end
Product
A [mm]
B [mm]
C [mm]
A130
108
17
205
A135
128
20
245
A140
157
25
300
Table 14: Value table for soaking
To soak the layers of contamination on the turbine, the cartridge group can be immersed
vertically in a container (02) with fluid.
u
Place the container (02) inside a larger container (03) so that the overflowing fluid can be
collected.
CAUTION
Selection of the cleaning agent
Cleaning agents that contain chlorine corrode metals.
u
Only use pH-neutral cleaning agents that do not corrode metals.
u
Observe the material safety data sheet.
u
Observe country-specific regulations regarding banned and restricted
substances.
u
Fill the container (02) with soaking fluid. To shorten the soaking time, the fluid can be
heated up to a maximum of 60 ºC.
Page
68
/
122
Summary of Contents for HT608827
Page 2: ......