Operation Manual / TPS44-H.. - TPS52-H..
10 Dismantling and fitting / 10.6 Removing the compressor casing
© Copyright 2021 ABB. All rights reserved.
HZTL4037_EN
Rev.G
June 2021
10.6
Removing the compressor casing
Fig. 28: Removing the compressor casing (1/2)
1. Place the turbocharger in a vertical position on a soft underlay.
2. Loosen the hexagon-head screws (72011) and remove them with fastening strips (72012).
Fig. 29: Removing the compressor casing (2/2)
1. Secure lifting gear to compressor casing (72000).
2. Remove the compressor casing (72000) vertically.
3. Rotate the compressor casing (72000) through 180° and put it in place.
4. Remove and dispose of O-ring (42012) (see chapter
Disposing of turbocharger compon-
).
5. Remove screw (72041).
6. Remove the diffuser (79000) vertically from the compressor casing.
Page
76
/
109