Operation Manual / 4 Product description / A100-M axial
Tables
Page 113 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Revision A
July 2016
Tables
Table 1 Related documents ................. 3
Table 2 Weight of the turbocharger ..... 9
Table 3 Foot bolt dimensions ............... 15
Table 4 Clamping screw tightening
torques ................................... 18
Table 5 Oil pressure range .................. 23
Table 6 Oil temperature at the inlet ...... 24
Table 7 Oil temperature at the outlet ... 24
Table 8 Expected replacement inter-
vals ......................................... 35
Table 9 Recommended replacement
intervals .................................. 35
Table 10 Tightening torque (81272) ....... 40
Table 11 Tightening torque (81273) ....... 40
Table 12 Compressor cleaning parame-
ters ......................................... 44
Table 13 Cleaning parameters Wet
cleaning of turbine and nozzle
ring ......................................... 49
Table 14 Malfunctions when starting –
Delayed start-up ..................... 51
Table 15 Malfunctions when starting –
Vibrations ............................... 51
Table 16 Malfunctions when starting –
Rubbing of rotating parts ......... 51
Table 17 Malfunctions during operation
– Lubricating oil pressure too
low .......................................... 52
Table 18 Malfunctions during operation
– Speed reductions ................. 52
Table 19 Malfunctions during operation
– Speed increases .................. 52
Table 20 Malfunctions during operation
– Exhaust gas temperature too
high......................................... 53
Table 21 Malfunctions during operation
– Charge air pressure too low . 53
Table 22 Malfunctions during operation
– Charge air pressure too high 54
Table 23 Surging of the turbocharger .... 54
Table 24 Malfunctions when stopping -
noises during run-down........... 55
Table 25 Malfunctions when stopping -
run-down time shortened ........ 55
Table 26 Malfunction, No speed meas-
urement signal or poor signal
amplitude ................................ 56
Table 27 Malfunction, Measured speed
too high ................................... 56
Table 28 Malfunction, Measured speed
too low .................................... 56
Table 29 Assembly weights ................... 59
Table 30 Tightening torque (27027) ....... 60
Table 31 Tightening torque (27027) ....... 61
Table 32 Axial clearance ....................... 62
Table 33 Tightening torque (56014) ....... 74
Table 34 Tightening torque (57005) ....... 75
Table 35 Tightening torque (61069) ....... 76
Table 36 Tightening torque (61059 /
42128 / 86505 / 25013) ........... 78
Table 37 Tightening torque (61037 /
61090) .................................... 80
Table 38 Tightening torque (77015) ....... 81
Table 39 Tightening torque (72011) ....... 83
Table 40 Axial clearance ....................... 84
Table 41 Tightening torque (56014 /
61009) .................................... 87
Table 42 Tightening torques .................. 91
Table 43 Tightening torques 61009 ....... 92
Table 44 Locking device tightening
torque ..................................... 95
Table 45 Cover plate dimensions 1 ........ 97
Table 46 Cover plate dimensions 2 ........ 97
Table 47 Cover plate dimensions 3 ........ 97
Table 48 Customer spare part set
(97070) ................................... 106
Table 49 Turbocharger with part num-
bers ........................................ 109
