"Simulation" menu
42/18-75 EN
"Simulation" menu
13
8
"Simulation" menu
1 Simulation
Switches the simulation in the TZID-C/TZID-C200 on ("active") or off ("inactive").
2 Operating
mode
Display the current operating mode.
3 Options
installed
Display the currently connected optional modules.
4
Position
Simulate analog position feedback.
When simulation is disabled, a corresponding error message is displayed.
5 Failure
Simulate alarm outputs and switching points. Press
to activate/deactivate the respec-
tive function.
9
"Information" menu
1
Device Tag
1 Message
Enter the device tag.
2
Tag
Enter the address on the bus.
3 Description
Enter the plant description.
4
Measuring task
Enter the measuring task.
5 Date
Enter the date (format MMDDYY).
2 HART
1 Universal
rev
Display the HART universal revision.
2 Fld
dev
rev
Display the field device revision.
3 Num
req
preams
Display the preambles used.
4 Poll
addr
Display the polling address.
Two minutes after the last user actions the TZID-C/TZID-C200 positioner returns
to the local mode. Note that the values are not polled automatically. Switch the
communicator off and on again to update the display.
F2