ABB G13 Page 35 User Manual Download

Page: 35 / 249

2CMC489001M0201

G13



Revision: A

User Manual

User Interface and Setup

4.5.2

Add scanned meter

The scanned meter is presented with an

ADD

button in the top right corner. The

meter has no name or location.

If a scanned meter is not added, it will be listed in the Scan and register meters the
next time Device scan is performed.

To add the meter:

1. Set

Location

name

by clicking on current name. Write new location

name.

2. Set

Device Alias

by clicking on Device Name. Write new meter alias.

3. Press

ADD

4. Press

Send

Changes are not made until data is sent.

4.5.3

User Management

Access level

Distributing

User Management

from

Segment

User Management

menu. It is possible to set the meter access level for administrators and users in
three levels:

• No Access - No access to read or configure the meter.
• View only - Possible to view values from the meter.
• Configure - Full rights to configure the meter.

Summary of Contents for G13


























































































































































































































































Search results

Summary of Contents for G13

Reviews:

Related manuals for G13

Brands by name

Popular brands

ABB G13, User Manual

Search results

Summary of Contents for G13

Reviews:

Related manuals for G13

Brands by name

Popular brands