JSON Communication
G13
101
2CMC489001M0201
User Manual
Revision: A
in meter firmware. However gateway admin might impose access restrictions up
above these for a given user.
Association objects can be used to check if a given parameter is supported by
meter or not. Say to know if a meter supports Read Active Export energy, then the
following procedure can be followed:
1. Get index for Active Export Energy Total from the following table. In this
case it is 2.
2. Check for values with index 2 in result of '/associationobjects'.
3. If Bitstring is '1' that indicates this meter supports active export energy
read. If Bitstring is '0' that indicates this meter does not support active
export energy read.
Quanity Index
ACTIVE_ENERGY_IMPORT_TOTAL 1
ACTIVE_ENERGY_EXPORT_TOTAL 2
ACTIVE_ENERGY_IMPORT_L1 3
ACTIVE_ENERGY_IMPORT_L2 4
ACTIVE_ENERGY_IMPORT_L3 5
ACTIVE_ENERGY_EXPORT_L1 6
ACTIVE_ENERGY_EXPORT_L2 7
ACTIVE_ENERGY_EXPORT_L3 8
ACTIVE_ENERGY_IMPORT_TAR1 9
ACTIVE_ENERGY_IMPORT_TAR2 10
ACTIVE_ENERGY_IMPORT_TAR3 11
ACTIVE_ENERGY_IMPORT_TAR4 12
ACTIVE_ENERGY_NET_TOTAL 13
ACTIVE_ENERGY_NET_L1 14
ACTIVE_ENERGY_NET_L2 15
ACTIVE_ENERGY_NET_L3 16
REACTIVE_ENERGY_IMPORT_TAR1 17
REACTIVE_ENERGY_IMPORT_TAR2 18
REACTIVE_ENERGY_IMPORT_TAR3 19
REACTIVE_ENERGY_IMPORT_TAR4 20
REACTIVE_ENERGY_IMPORT_TOTAL 21
REACTIVE_ENERGY_EXPORT_TOTAL 22
REACTIVE_ENERGY_IMPORT_L1 23
REACTIVE_ENERGY_IMPORT_L2 24
REACTIVE_ENERGY_IMPORT_L3 25
REACTIVE_ENERGY_EXPORT_L1 26
REACTIVE_ENERGY_EXPORT_L2 27
REACTIVE_ENERGY_EXPORT_L3 28
REACTIVE_ENERGY_NET_TOTAL 29
REACTIVE_ENERGY_NET_L1 30
REACTIVE_ENERGY_NET_L2 31
REACTIVE_ENERGY_NET_L3 32