ABB FSCA-01, Manual

Page: 14 / 52

Drive configuration
14
Table 1. FSCA-01 configuration parameters - group A *
* Actual parameter group number depends on the drive type. Eg,
group A equals to parameter group 51 in ACS350 and ACSM1.
Par. no. Parameter name Alternative settings Default setting
1 FBA TYPE (Read-only) RS-485
2 PROTOCOL/
PROFILE Modbus:
(0) ABB Drives Classic
(1) ABB Drives Enhanced
(2) Transparent 16-bit
(3) Transparent 32-bit Modbus:
(0) ABB Drives
Classic
3 STATION ID 1…247 1
4 BAUD RATE (0) 9.6 kbit/s
(1) 19.2 kbit/s
(2) 38.4 kbit/s
(3) 57.6 kbit/s
(4) 115.2 kbit/s (0) 9.6 kbit/s
5 PARITY (0) 8 NONE 1
(1) 8 NONE 2
(2) 8 EVEN 1
(3) 8 ODD 1 (0) 8 NONE 1
6 MODBUS TIMEOUT 0…65535 0
7 TIMEOUT MODE (0) NONE
(1) ANY MESSAGE
(2) CONTROL WRITE 0
8 OK MESSAGES 0…65535
9 CRC ERRORS 0…65535
10 UART ERRORS 0…65535
11… 26 Reserved