ABB FlexLoader Vision, Product Manual

Page: 73 / 288

Description Pos.
Polarity : Any E
Polarity : Same or reverse F
Separation
With the parameters for separation (distance) you can control how close different
occurrences of details may be. You can request a minimum distance in x or y
coordinates, in scale factor, or in rotation angle. You can also select to ignore
separation requirements for certain parameters by selecting the
Disable checkbox.
Teachin detail example.
Two occurrences of details that have the same
angle and position, but differ in size. If the differ-
ence is bigger than the specified scale value, or
if the
Disable checkbox has been selected, both
occurrences are found.
Two occurrences of details that have the same
position and size, but differ in angle. If the differ-
ence is bigger than the specified angle value, or
if the
Disable checkbox has been selected, both
occurrences are found.
Two occurrences of details that have the same
angle and size, but differ in the x or y position. If
the difference is bigger than the specified x or y
position value, or if the
Disable checkbox has
been selected, both occurrences are found.
Product manual - FlexLoader Vision 73
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
5 Advanced teachin settings
5.3.1 Standard analysis
Continued