ABB FIO-01, User Manual

Page: 13 / 22

Installation
13
Installation
Warning! Follow the safety instructions given in this guide and in
the drive’s hardware manual .
Mounting
Warning! Before installation, switch off the drive power supply.
Wait for five minutes to ensure that the capacitor bank of the drive
is discharged. Switch off all dangerous voltages connected from
external control circuits to the inputs and outputs of the drive.
The FIO-01 is to be inserted into the option slot of the drive. The
module is held in place with plastic retaining clips and one screw
.
On installation of the module, the signal and power connection to
the drive is automatically made through a 20-pin connector.
Mounting procedure:
• Insert the module carefully into the option slot until the retaining
clips lock the module into position.
• Fasten the screw (included) to the stand-off.
Note: Correct installation of the screw is essential for fulfilling the
EMC requirements and for proper operation of the module.