80 The ESI-Manager user interface
Manual Energy Storage Inverter ESI-S
−
will appear. No modification can be made to the settings
The software lock is switched on in the menu [/Welcome/Settings/Installation
set./Password].
In order to unlock the system go to the same menu. After giving the appropriate
password, the system will be unlocked. The password is a four-digit number, which is
set by default to:
1234
Entering the password is done by choosing the right value numeric keyboard which
appears on the screen. The password can be changed in the menu
[/Welcome/Settings/Installation set/Change Password]. Entering the new password is
done the same way and confirming the password by re-entering the same.
If hardware and software lock are combined, the hardware lock has priority over the
software lock.
7.7 The ESI start, stop and fault acknowledgement menu
WARNING: The active inverter should only be started when it has been installed and
commissioned according to the guidelines of this manual. Failure to adhere to this
guideline may damage the inverter and void warranty.
Refer to
for more information on commissioning the inverter.
−
‘The ESI start, stop and fault acknowledgement’ menu can only be accessed in
the main ‘Welcome’ screen [/Welcome/ESI]
‘The start, stop and fault acknowledgement’ menu is the default menu for starting,
stopping and resetting the inverter.
As can be seen in
the ‘start, stop and fault acknowledgement’ menu behaves
differently depending on the inverter status.
Table 37: ‘Start, stop and fault acknowledgement’ menu functionality according to the inverter
status
Inverter status
Menu display
Pushing results
in…
Inverter stopped, no critical
error present (i.e. ‘normal’ stop
condition)
ESI
START
Starting
the
inverter
(a) (b)
Inverter running, no critical error
present (i.e. ‘normal’ running
condition)
ESI STOP
Stopping the inverter
(a) (b)
Inverter stopped on critical fault ACK. FAULT
Acknowledging the fault
(a) (b)
