Turn off all power to switchgear. Tagout and
lockout main source, up-stream or main
breaker.
Failure to comply with these instructions will
result in death or serious injury from severe
burns caused by arc flashing that has
exceedingly high temperatures.
Always wear personal protection equipment
according to OSHA standards and appropriate
to the severity of potential burns.
Ensure only qualified personnel install, operate, service and maintain all electrical
equipment.
Do not walk or remain under any heavy
assembly while hoisted above head as the
chains securing the assembly may give way.
Ensure lifting equipment has capability for device being lifted.
Wear hard hat, gloves, and safety shoes.
Failure to comply with these instructions could result in serious injury
.
PRODUCT DAMAGE
Ensure circuit breaker and its accessories are always
used within their designated ratings.
Do not allow the circuit breaker to hit a hard surface
while handling.
Do not drag or slide the circuit breaker across a hard
or rough surface.
A factory-installed rejection feature prevents mismatching circuit breakers and
cassettes/ substructure, preventing the insertion of a circuit breaker with a lower
rating
into a higher rated cassette/substructure, or the insertion of a higher rated
circuit breaker into a lower rated cassette/substructure.
Danger
Caution
Notice
Unpack Circuit Breaker
By following the procedures below, one should be able to install the breaker with minimum
effort and time.
©2022 Emax 2 Retrofill Circuit Breakers 800A-4000A 17
2TSA451014P0000 Rev-B
