Figure 13 is an example of a compartment in the AKD-6 switchgear that is empty; that is, the
upper compartment is ready for a retrofill breaker where the legacy, or original breaker, had
been racked out and new wire connections made. The lower compartment has a retrofill
breaker, already installed. In this figure, there is also a photo showing a mechanically-
operated status indicator (connect/disconnect) that worked with the original breaker. This
device, if left in the compartment as is, won't interfere with the retrofill breaker; it can,
however, be disassembled by removing its hardware. Figure 14 displays the bus inside the
gear.
Figure 14
Figure 13
AKD6 Breaker Compartment (Upper and Lower Compartments)
Bus, Interior View
©2022 Emax 2 Retrofill Circuit Breakers 800A-4000A 15
2TSA451014P0000 Rev-B
