2TLJ172066M0201, rev. F
4
www.abb.com/jokabsafety
2015-02-09
1
Introduction
Scope
The purpose of these instructions is to describe the non-contact safety sensor Eden and to provide the necessary
information required for installation and operation.
Audience
This document is intended for authorized installation personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
Basic knowledge of ABB Jokab Safety products.
Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Warning!
Danger of severe personal injury!
An instruction or procedure which, if not carried out correctly, may result in injury to the technician
or other personnel.
Caution!
Danger of damage to the equipment!
An instruction or procedure which, if not carried out correctly, may damage the equipment.
NB: Notes are used to provide important or explanatory information.
Please note!
This model of Eden is obsolete and has been replaced by Eden DYN