ABB DWTL1 User Manual Download

Page: 55 / 60

gli

- 53 -

User manual DWTL1

RESET MENU

“Reset” menu allows you to restore the initial state of the device.

Available resets:

Settings reset: deletes all the carried out settings (except the language and the PIN)

Time programs reset: deletes all saved time programs

Holiday programs reset: deletes all saved holiday programs

Astro programs reset: deletes all saved astronomical programs

Counter reset: resets the counter of the channel

Reset all: carries out all the above described resets and deletes the language and PIN protection

There is also another reset, of hardware type, which allows you to reset the device in case it responds to the pressing of the keys so

unexpectedly, without losing the carried out settings/programs (only the date and the time are lost).

To carry out a hardware reset:

press the key “R” with a sharp object

The hardware reset is also useful when you forget PIN protection. Reset, in fact, unlocks the keyboard for 3 minutes, the necessary time to

access the appropriate menu and check/disable PIN.

Summary of Contents for DWTL1





























































Search results

Summary of Contents for DWTL1

Reviews:

Related manuals for DWTL1

Brands by name

Popular brands

ABB DWTL1, User Manual

Search results

Summary of Contents for DWTL1

Reviews:

Related manuals for DWTL1

Brands by name

Popular brands