manualshive.com logo in svg

ABB DODGE USN 200 Series, Manual, Page: 7 / 16

Share
Download
ABB DODGE USN 200 Series Manual Download Page 7

7

LONG-TERM STORAGE OF PRE-

ASSEMBLED BEARINGS

Oil Lubrication

(Adapter Mount or Direct Mount)

USN bearings are specifically designed to handle either grease 
or oil lubrication. Oil lubrication is normally required at high 
speeds as well as high loads or whenever heat from an external 
source is flowing into the bearing. Oil lubrication may be static 
or circulating. With static oil, fill the bearing cavity with oil up to 
the centerline of the lower roller. The dimension is identified as 
“w” and is shown on Table 12. Mount an oil sight gauge in the 
drilled and tapped drain hole on the side of the plummer block 
for visual indication of this level. The oil level may drop or rise 
during operation depending on the rotation of the bearing. Oil 
should be added only when the bearing is not operating. Both 
the static oil level and the running oil level should be marked on 
the oil sight gauge and properly identified.

Prior to installation on the structure, if the application RPM is 
greater than 20% of catalog maximum speed, excess grease 
must be removed to the levels outlined previously. Removal of 
excess grease must be done in a clean, protected environment.

For circulating oil, the flow rate and size of return drains are 
shown in Table 12. Consult application engineering for ABB 
MPT products for recommendations.

Summary of Contents for DODGE USN 200 Series

















Reviews:

No comments