©2020 ABB. All rights reserved.
Name
Description
VIN+
M5*0.8 stud, positive input voltage terminals, two M5 jam nuts are included.
VIN-
M5*0.8 stud, negative input voltage terminals, two M5 jam nuts are included.
VOUT+
M5*0.8 stud, positive output voltage terminals, two M5 jam nuts are included.
VOUT-
M5*0.8 stud, negative output voltage terminals, two M5 jam nuts are included.
IN_AUX
Auxiliary power input for pulse load if needed (by default, pulse load takes power from input
power rail directly)
M_VIN
SMA socket for input voltage measurement
IN_IREF
SMA socket for pulse load current input reference
IN_SEQ
External sequence/track signal
IOUT_Sense
Measurement port for output current of each channel, total 8
LoadSlammer
TM
Socket for LoadSlammer
TM
CHECK1
SMA socket for pulse load current read back
CHECK2
Redundant SMA socket for pulse load current read back (DNP)
M_VOUT
SMA socket for output voltage measurement
PMBus
PMBus port for connecting to ABB USB to I2C dongle, notice Pin1 location
IN/OUT_SYNC
SMA socket for measure SYNC signal
SWITCH
Mechanical switch for turn on/off EVM, notice on/off direction
Name
Description
Extra Cap Space
Solder mask free area for populating extra capacitors
PCC
Point of common coupling, common remote sense point for all DJT090s. M_VOUT is routed
from this point.
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
Extra Cap Space
PCC
Bottom View
