Dimensions and weights
124
3ADW000462R0401 DCS880 Hardware manual e d
Mounting the module size H6 inside a cabinet
Two supports should be mounted inside the cabinet in such a way, that they can carry the module's weight. The
minimum distance between the supports should not be less than 480 mm because of electrical clearance (DC
busbars).
A L-shape support as indicated will allow to place the converter temporarily close to the front end of the support
(weight still taken by a lifting device) and then push it back to the back plate of the cabinet. The upper and lower
holes in the back plate of the converter should be used to fix the converter in that position.
Size H6
DCS880-S0B-0900
DCS880-S0B-1200
DCS880-S0B-1500
DCS880-S0B-2000
Busbars in mm:
DC:
80 x 10
AC:
60 x 5
775
820
102
944
349.5
400
461
55
127.5
125
125
450
510
773
22
85.5 17
26
34
26
17
400
P
14
69
80
44.5
65.5 25 50 50
50
325.5
17.75
P
14
150
250
Minimum
top clearance
Minimum
bottom clearance
Cable tray
width = 40 mm
height = 39 mm
Earthing M12
Earthing M12
Fan terminal
C1
D1
U1
V1
W1
For M10
min.480
> 510
Support
Support
MG_880_006_H6_a.ai
*
