Chapter 6 - Start-up
6 - 2
DCS 500 12-Pulse Planning and Start-Up
12-pulse mode
12-pulse power converter
-
Set the parameters for 12-pulse mode (see further on in this
chapter)
Please make sure that the current limitation parameters (406),
(2307) and (2308) are equal in size.
-
Connect the power sections of master and slave to the mains
-
Repeat start-up procedure as before with the master power con-
verter.
-
Check the settings of both limits for continuous current flow, and
re-optimize the current regulator parameters. (The current regu-
lator self-setting functions cannot be used here.)
-
Optimize the speed controller parameters in the master.
-
Set/check the parameters for the monitoring functions.
-
Check the current distribution.
-
Check the error messages and the safety shutdown functions.
