ABB D1M 15, User Manual, Page: 23 / 50

23
D1M 15 MULTIMETER USER MANUAL
7. Configuration (CFG)
When entering the CFG section, in order to change any configuration of the device, it is mandatory to
enter the password. It is needed to enter the password again when customer needs to re-operate after
inactivity time.
In case of wrong entering of the password for three times in a row, user will have to wait for 5 minutes
until he can enter the password once again.
In order to read only the configurations, it is possible to simultaneously press “
Down
” and “
Up
” buttons.
CFG
includes the following menus:
Menu Description
UNT(UNIT) Settings related to the device itself
ISTL(Installation) Settings related to the installation conditions
I/O(Input/Output) Settings related to DO
ALM(Alarm) Definition of alarm conditions
COM(Communication) Settings related to the embedded communication protocols of the D1M
version
7.1.Unit (UNT)
UNIT includes the following sub-menus:
Menu Description
PWD(Password) Change the existing password
RST(Reset) Full or partial reset of the meter
INF(Information) Device information
ENS (EnergySaving) Set inactivity time of HMI for energy saving
LOG(AuditLog) Count the times of CT,VT, Wiring type, FW update configuration
HOMPAGE Set to return to which page and when to return
LED Set to indicate the speed of energy consumption
Modify password (PWD)
PWD shares the same interface and setting way with password setting. For details, see “6.1.Password for
the first use (PWD)” .
CFG>UNT>PWD