16
D1M 15
MULTIMETER USER MANUAL
5.2.Buttons
Each D1M 15 is provided with 3 push buttons as per below picture:
Functions of each button might change according to the displayed page on the meter. See below for a
complete description:
# Button
Short press functions
Long press functions
1
OK
Confirm the numerical value or option input, go to the
next class menu
Go to the main menu
2 Down
Page down, numerical value amplifies 10 times
Return to the previous menu
3 Up
Page up, numerical value select 0~9 and decimal point
Go to the Home page
There are some functions need to use combination of pushbuttons, see below for a complete description:
Combination buttons
Screen
Function
Down + Up
During entering password
Short press together to escape password
check configuration read-only.
5.3.Data entry
Some of the pages require the entry of numerical characters (0-9) in the Configuration mode. In these
cases, the display will show an active field identified by a flashing number.
Data entry procedure
Press the “
OK
” button to start setting on the specified parameter page, and the parameter starts to blink
display.
The data entry procedure is as follows:
Short press the “
Up
” Arrow button to set the first(on the far left) numerical character in a loop from ‘0’ to
‘9’ and ‘0.0’, until the required character is obtained.
• Short press the “
Down
” Arrow button to confirm the first numerical character and move this character
to the left, or confirm the first decimal point.
• Repeat the step 1 and 2 to set the second and other numerical characters, it’s the same method as the
first numerical character.
• It will add a character ‘0’ on the right side when short press the “
Down
” Arrow button to move current
numerical characters to the left.
3
2
1