Operation
ABB, 1SBC159103M0201
25
7.9 Copying an Application
To copy an application from one CP430 to another CP430, select
F3 - Copy
from the system menu. Set the dip switch
SW7 = ON
and connect the two op-
erator terminals with a download cable. After the self-test, the system menu will
be displayed on the screen.
Select
F3 - Copy
in the system menu from the operator terminal with the appli-
cation to be copied. The operator terminal will prompt for a password: enter the
password set in CP400Soft from
Application/Workstation Setup
. Once the cor-
rect password is entered, the CP430 starts to copy the application to the
other CP430.
For information about setting a password, please see section
.
The following appears on the screens during the copying:
Note:
When copying for the first time, make sure to first run the application once, or
else the copy function will not work.
MA00824B_MAEN859.book Page 25 Tuesday, June 5, 2007 10:34 AM
