Operation
22
ABB, 1SBC159103M0201
while the operator terminal is downloading:
7.7 Uploading an Application
An application can also be uploaded from the operator terminal to the PC.
Thus, a user can save an application as a *.V6F file in CP400Soft for future use.
Make sure that the operator terminal and the PC are connected according to
section
7.6 Downloading an Application
. Set the dip switch
SW7 = ON
. After
the self-test, the system menu will be displayed on the screen and the operator
terminal is ready to upload the application.
Also make sure that communication parameters are correctly configured. Select
File/Upload Application
in CP400Soft and the
Save As
dialog box will appear
on the screen. Enter the name of a firmware file (*.AF6) to save. Click
Save
.
Then the operator terminal will prompt for a password: enter the password set
in CP400Soft from
Application/Workstation Setup
. Once the correct password
is entered, the operator terminal starts to upload the application to the PC. For
information about setting a password, please see section
Warning:
To avoid an electrical shock, be sure to switch off the power before connecting the
communication cable to the operator terminal.
MA00824B_MAEN859.book Page 22 Tuesday, June 5, 2007 10:34 AM
