24
CP620, CP630, CP635, CP651, CP661, CP665, CP676
Getting Started
The Control Panels (CP6xx-x, not CP6xx-x-WEB versions) must be programmed with the programming
package PB610 Panel Builder 600.
The Control Panels are programmed via the Ethernet interface.
The Control Panel must be in configuration mode to be programmed.
To program a Control Panel connect the Control Panel to a PC running PB610 Panel Builder 600
software package.
The software package PB610 Panel Builder 600 is a Windows
TM
application and must be properly in-
stalled. The Windows
TM
environment is not included in the software package PB610 Panel Builder 600
and must already be installed on the PC.
PB610 Panel Builder 600 uses the PC Ethernet interface to communicate with the target device.
Make sure that the proper firewall policy is configured in order to allow PB610 Panel Builder 600 to
access the network.
The version of the Panel Builder used must be compatible with the PB610 Panel Builder 600 Runtime
version installed on the Control Panel to be programmed. An update of the panel´s runtime can be done
by means of the programming software.
Check with technical support for more information on compatibility between firmware and programming
software.
Summary of Contents for CP 600 Series
Page 1: ......
