ABB COM600 series, Configuration Manual

Page: 19 / 66

5. Design the bay layout using SLD editor, see 3.5.1, Using the SLD Editor.
6. Use the data connection function, see 3.6.1, General about Data connection.
Adding busbar object 3.4.7.
After the voltage level object has been successfully added, you can continue building
the object tree by adding busbar objects.
To add a busbar object:
1.
Select the voltage level object and right-click it.
2. Add a busbar object by selecting New > Functional > BusBar.
3. Rename the new object. The names of the busbar objects have to be unique.
4. Modify busbar properties if necessary.
5. Design the busbar layout using SLD editor, see 3.5.1, Using the SLD Editor.
Single Line Diagram 3.5.
Using the SLD Editor 3.5.1.
To open the SLD Editor, select substation, voltage level, bus, or bay object and right-
click them. Then select SLD Editor from the menu. The higher level contains the layout
of the lower levels.
With the SLD Editor you can add objects to the Single Line Diagram, modify existing
objects, and specify electrical connections. You can also fine-tune the layout of the dia-
gram and add and modify descriptive texts. You can drag and drop symbols needed in
the SLD from the symbol library. Click Preview to preview the layout of the diagram.
The supported browsers are Microsoft Internet Explorer (requires Adobe SVG viewer
3.03), Mozilla Firefox®, and Opera.
19
COM600 series, Version 4.1
1MRS756740
HMI Configuration Manual