ABB COM600 4.0, Operation Manual

Page: 15 / 34

4. Enter the new source capacity limit value in the field next to the source name.
5. Click Set Max. Capacity.
Changes to the source maximum capacity limit are temporary.
They will be overwritten when you turn off the simulation
mode and redownload the project to COM600.
Viewing the active settings group 3.5.
To view the active settings group for a switch:
1.
In COM600 HMI, select FDIR.
2. In the FDIR Control dialog, select the Settings Group tab.
3. Select the switch from the Switch ID list.
You can see the active settings group below the list.
Viewing FDIR log 3.6.
To view the FDIR log:
1.
In COM600 HMI, select FDIR.
2. In the FDIR Control dialog, select the Logs tab.
You can see time and events on the Logs tab.
15
Grid Automation Controller COM600 4.0
1MRS757279
FDIR Operation Manual