ABB COM 600, Operator'S Manual

Page: 28 / 38

parameters2.jpg
Figure 3.10.1-1 An example of the Parameter Setting view
To change parameter settings:
1. Click Enable Write on the top of the Parameter Setting view.
2. Select a new value from the drop down menu or type in a value in the New Value
field. To apply changes, click Write to IED.
3. If the new values are accepted, the background of the modified parameters turns green.
If the new valuea are incorrect, a message "Some settings are not in correct range" is
displayed and the background of the modified parameters turns red. Type in values
that are in the correct value range.
4. To manually update the values, click Refresh Values.
5. After you have made all necessary changes click Disable Write.
Measurements 3.11.
Viewing measurements 3.11.1.
To view measurement information, click on Measurements below the desired IED in
the substation structure. HMI updates the measurement information automatically.
28
1MRS756121
COM 600 Station Automation Series COM 605 3.0
Operator's Guide